Item #PBB-1419 and #PBT 1421

Thanks for your interest in Puresound Wires for your Premier Pipe Band Snare Drum. The Premier Pipe Band Snare has the destinction of the most solo and drums corps titles then any other drum on the market. Team that up with our wires and you will have the sound your looking for!

Installation

Bottom Wires

For the #PBB-1419 bottom snare wires just loosen the tension knob on both strainer assembly's and fit the snare ends into the receiving pins. Then just tighten both sides evenly.

Internal Wires

Remove the bottom head. On the Premier HTS 700 the wood shell sits inside the metal frame and can be removed. Make sure you notate the tension and snare height adjustment screws (pictured below) so that you put the wood shell back in the correct way. It is also important that the internal snare frame assembly is centered on the head.


Click on the snare assembly for a larger image
This is the internal snare assembly. To remove the old wires just slide them off of the receiving bars and replace them with your Puresound #PBT 1421. When you click on the snare assembly you will get a top view of this assembly with the top head removed. If you click on the black frame you will get a larger version of that image.

The Premier name is a registered trademark and not affiliated with Puresound Percussion