The Drum |
Remove the Hardware |
||
 |
 |
 |
Remove all of the hardware from
the shell and store it in Zip Loc bags. This would be a good time to
clean the hardware and pack the lug casing spring with felt. |
Dremmel Tool |
Small File |
Pliers |
Punch |
| Use a Dremmel Tool with a cut off wheel. Carefully cut the grommet from the inside and then you can easily bend the grommet inward. Cut it in 4 spots. | By taking a small file you can carefully
file the grommet down and it will then be easily removed with a pliers. |
Use a sharp screwdriver and carefully
peel the grommet around the edge and then us a pliers to bend it in
and pull it out from the outside. |
Insert a tapered punch from the inside,
and lightly tap with a small hammer. Brace the outside of the shell
around the badge |
 |
 |
 |
 |